13
6.7 Place both lids on the container. (150C & 450 have a sliding cover).
First the valve cover; making sure the connections fit in the large opening and the
drain in the small opening. (if the valve cover does not sit correctly check the position
of the base plate). (see 4.8, page 10).
Then replace the front lid. For future salt refills, only the front lid has to be removed.
For ongoing operation, add salt to the container when it gets low. Do not allow the salt
level to drop below the level of the water in the salt cabinet and do not allow the salt
container to become drained of salt completely as this will impair the performance of
the unit and its long term ability to provide soft water.
DO NOT FORGET TO CONNECT THE OVERFLOW TO A SUITABLE DRAIN
RECORD THE DATE OF INSTALLATION INSIDE THE FRONT COVER AND KEEP THIS MANUAL
FOR FUTURE REFERENCE.
ALSO ENSURE THAT THE REGISTRATION FORM IS COMPLETED AND
RETURNED TO THE ADDRESS ON THE CARD TO ENSURE YOUR NEW WATER SOFTENER IS
COVERED WITH OUR 5 YEAR PARTS AND LABOUR WARRANTY
Congratulations and welcome to the benefits of quality softened
water!
To Next Page
Loading...
