Scallywag Kids BUNK CONVERSION KIT - Ladder Assembly & Fixing To Bed; Assemble Ladder Sides and Treads; Fix Ladder to Bed Frame

This product is designed to conform to the latest safety regulations and we hope you will be happy with
your purchase. This product is primarily produced from quality Scandinavian pine. As such you may find
small knot or surface defects that are inherent with a natural resource and in no way compromise safety or
functionality. Whilst every effort is made to ensure this product reaches you in good condition, in the
unlikely event you find a problem with any component, please DO NOT ASSEMBLE – and contact your
retailer. As you will appreciate, we cannot accept any liability for damage once an attempt to assemble has
been made.
Cleaning: a damp cloth should be sufficient to keep this product in good order. Please do not use abrasive
cleaning materials as this will incur damage. Thank you for choosing our product.
4 - Ladder Assembly & Fixing To Bed
Assembly Components:
Box 2 & Fittings C and D
(C) 10 x M6 25mm Bolt (For Ladder Treads)
(D) 2 x M6 Connecting Bolts (For Ladder To Bed Leg)
1 x 4mm Allen Key (For Ladder)
1. Assemble ladder sides
& treads using bolt C &
4mm allen key
provided, taking care
to avoid marking the
ladder sides.
2. Connect to the bunk
bed frame using fitting
D into the bed and the
existing bolt from the
starter bed into the
barrel nut in the safety
rails.
C
C
C
C
C
C
C
C
C
C
A
A
D
D
Manufactured in the UK