Technical specifications
All measurements are stated in cm. All angles are stated in degrees.
All measurement and angles are stated without tolerances.
Voltage supply:220V，50Hz
Max. current input: 4.5 A
Voltage output: 24V
Protection class: IP 54
Insulation class: II, type B
The patient is not separated from the ground and the chassis.
Double insulated.
The bed is not provided with a mains switch, so the mains plug is the only separation
from the mains.
Sound level: 45-50 dB(A)
The product should be reused where possible.
Weights
Bed end-1 piece------------------------------------------17 kg
Mattress support, head end----------------------- ------26 kg
Mattress support, foot end------------------------------ 15 kg
Siderail-1 piece------------------------------------- ------8 kg
Lifting pole------------------------------------------ -----7 kg
Grab handle----------------------------------------------- 7 kg
Mattress support extension (10cm)-------------------- 3.2 kg
Mattress support extension (20cm)-------------------- 5.5 kg
Bed, complete, excluding accessories-----------------75 kg
To Next Page
Loading...