Directions of use
Electric operation Manual operation
Adjustment of Backrest
Raising or lowering the backrest to the required angle
use the button with the symbol shown on the right.
Adjustment of the thigh section
(only four section beds)
Use the button with the symbol shown on the right.
Adjustment of Height of Mattress section
Use the button with the symbol shown on the right.
Adjustment of the leg section
Use the handle when raising or lowering the leg section.
Raising or lowering the leg section to the required angle:
UP: Lift the leg section.
Down: Lift the leg section right up and then lower it.
Mattress Section in tilted Position
Tilted to 7°and 9°
!
Always leave the bed in the Lowest Position. Otherwise there is a risk of
getting squeezed due to accidental Lowering of the mattress support. A
person under the bed can be seriously injured during height adjustments
.
!
There is a risk of getting squeezed between the thigh section and the top
frame when the thigh section is lowered.
!
There is a risk of getting squeezed between the backrest and the cross rail on
the head end of the top frame. There is also a risk of getting squeezed
between the leg section and the cross rail on the foot end of top frame when
the backrest/leg section lowered.
To Next Page
Loading...