Brakes
Each of the bed’s 4 wheels is provided with brakes for both lengthwise and crosswise
locking. The brake is foot-operated.
Emergency lowering of the backrest and/or thigh section – Fig10
An emergency release of the mattress support may be necessary in case of e.g. a
power or motor failure. An emergency release of the height adjustment is NOT
possible!
- Remove the plug from the mains before emergency release of the
mattress support
- In an emergency the mattress sections are released by pulling out the
cotter pin from the motor.
!
A minimum of two persons are required to release a mattress
Section. Both persons hold the mattress section in locked position. One of
them pulls out the cotter pin. Both slowly lower the mattress section until it
is completely down.
IMPORTANT SAFETY NOTICE
Children must NEVER be allowed to play with or left unsupervised near electrically
operated profiling or lifting beds at any time.
Whenever possible remove the plug from the mains when product not in use.
Please warm visitors with children of the potential danger of entrapment.
To Next Page
Loading...