EasyManua.ls Logo

SCAN DSA 4 User Manual

SCAN DSA 4
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Page 1
INSTRUCTIONS FOR
INSTALLATION AND USE
SCAN DSA 4
Tested &
Listed by
Beaverton
O regon U SA
OMNI-Test Laboratories, Inc.
Save these instructions
January 2004
Krog Iversen & CO. A/S, DK- 5492 Vissenbjerg
Denmark

Other manuals for SCAN DSA 4

Question and Answer IconNeed help?

Do you have a question about the SCAN DSA 4 and is the answer not in the manual?

SCAN DSA 4 Specifications

General IconGeneral
BrandSCAN
ModelDSA 4
CategoryIndoor Fireplace
LanguageEnglish

Summary

1. IMPORTANT SAFETY NOTICE

1.1 Prevent Creosote Fires

Guidance on preventing creosote buildup in chimneys.

1.2 Prevent Over Firing

Advice on avoiding over-firing to prevent house fires and damage.

2. CAUTIONS

3. INTRODUCTION AND INSTRUCTIONS FOR USE

3.1 About the SCAN DSA 4 Fireplace

General information about the SCAN DSA 4 fireplace model.

3.2 Baffle Cassette

Details on the baffle cassette, its installation, and handling.

3.3 Glass

Information on the heat-resistant ceramic glass and its cleaning.

3.4 Smoke Detectors

Recommendation for installing smoke detectors near the fireplace.

3.5 Room Ventilation

Requirements for adequate air supply for combustion.

3.6 Firebricks and Skamol Liners

Information on firebricks and Skamol liners, including minor cracks.

3.7 Ceramic Gasket

Details about the ceramic gasket and its maintenance.

3.8 Pre-Installation Check List

A checklist of essential items to verify before starting fireplace installation.

4. INSTALLATION (Qualified Technicians Only)

4.1 Fireplace Size Requirements

Specifies the minimum dimensions for masonry fireplaces for installation.

4.2 Fireplace Placement Requirements

Guidelines for safely positioning the fireplace, including clearance distances.

4.3 Hearth and Floor Protection Requirements

Details on required hearth and floor protection materials and thicknesses.

4.3.1 Minimum Clearances

Specifies minimum clearance distances to combustible materials for installation.

4.4 Masonry Fireplace Requirements

Essential requirements for installing the insert into a masonry fireplace.

4.5 Drafting Performance

Factors affecting the fireplace's draft performance.

4.6 Fireplace with Direct Connection (Masonry Fireplace)

Guidance for connecting the fireplace directly to a masonry fireplace.

4.7 Surround Panel Installation

Instructions for installing decorative surround panels around the fireplace.

4.8 Combustion Air Supply

Importance of adequate air supply for efficient and safe combustion.

4.9 Draft Requirements

Technical specifications for chimney draft and connection piece dimensions.

4.10 Chimney Installation

Guidelines for connecting the fireplace to a chimney system.

4.10.1 Top Discharge with Direct Connection to Steel Chimney

Specific instructions for connecting to a steel chimney.

5. OPERATION

5.1 Fueling the Fireplace

Guidance on selecting and using appropriate wood fuel for the fireplace.

5.2 Starting a Fire

Step-by-step instructions for safely starting a fire in the fireplace.

5.3 Refueling

Procedures for safely adding more fuel to a burning fireplace.

6. MAINTENANCE

6.1 Ash Disposal and Removal

Safe procedures for removing and disposing of fireplace ashes.

6.2 Cleaning of Fireplace

Methods for cleaning the fireplace exterior and interior.

6.3 Removing Baffle Cassette for Cleaning

Instructions for removing the baffle cassette for cleaning.

6.4 Creosote Formation and the Need for Removal

Explanation of creosote formation and its removal to prevent fires.

6.5 Door Glass

Information on cleaning and maintaining the fireplace door glass.

6.5.1 Replacing Broken Door Glass

Detailed steps for replacing the fireplace door glass.

6.6 Replacement Part List

A list of available replacement parts and their corresponding part numbers.

6.7 Safety Label

Key safety information and clearances as presented on the product label.

7. WARRANTY PROVISIONS FOR SCAN WOOD BURNING PRODUCTS

8. TROUBLESHOOTING