EasyManua.ls Logo

Scandium SCDW60 - 4 Installation; Positioning the Appliance; Levelling the Appliance; About Power Connection

Scandium SCDW60
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 7
Positioning the Appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,
along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can
be positioned either to the right or the left sides to facilitate proper installation.
Levelling the Appliance
Once the appliance is positioned for levelling, the height of the dishwasher may be
altered by adjusting the level of the feet. The appliance should not be inclined more
than 2˚.
About Power Connection
4. Installation
WARNING
Do not use an extension cord or an adapter plug with this appliance.
Do not, under any circumstances, cut or remove the earthing connection from the power cord.
Electrical Requirements
Check the rating label for the rating voltage and connect the dishwasher to the appropriate power supply.
Electrical Connection
Ensure the voltage and frequency of the power corresponds to the rating plate. Only insert the plug into an
electrical socket which is earthed properly.
Grounding Instructions
This appliance must be earthed. In the event of a
malfunction or breakdown, earthing will reduce the risk of electric shock by providing a path of least resistance
for the electric current. This appliance is equipped with a cord having an equipment-earthing conductor
and an earthing plug. The plug must be plugged into an appropriate outlet that is installed and earthed in
accordance with all local standards and requirements.
WARNING
Insure proper ground exists before use.