EasyManua.ls Logo

Scandomestic SFS 206 W - User Manual

Scandomestic SFS 206 W
15 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SFS 206 W

Questions and Answers

  • C
    Clayton GonzalezAug 9, 2025
    Why is my Scandomestic SFS 206 W light turned off?
    • J
      James TaylorAug 9, 2025
      If the light inside your Scandomestic Refrigerator is off, verify that the appliance is properly connected to the power mains and that the circuit breaker hasn't tripped, or the fuse hasn't blown. Also, the bulb might be broken and needs replacement. If the temperature control lights (-18 °C, -22 °C, -26 °C) and “On” are flashing, the temperature sensor is defective and you should call for service. If you see a symbol indicating that the temperature inside the freezer is too high, try setting the thermostat to a colder temperature or activating fast freezing.
  • R
    Ronnie AlexanderAug 14, 2025
    What to do if my Scandomestic SFS 206 W freezer is not generating enough cold?
    • E
      ericvaughanAug 14, 2025
      If your Scandomestic Refrigerator freezer isn't cold enough, first check the temperature settings as described in the “Setting the temperature” section. If you've just loaded a large amount of food, readjust the temperature accordingly, as explained in the same section. Also, avoid opening the freezer door too frequently or leaving it open for extended periods.
  • E
    Emily DominguezAug 18, 2025
    What to do if my Scandomestic SFS 206 W freezer doesn't generate any cold at all?
    • M
      Matthew AustinAug 19, 2025
      If your Scandomestic Refrigerator freezer isn't generating any cold, ensure that the electronic card is powered on. Check that the refrigerator is properly connected to the mains. Also, verify that the mains circuit breaker hasn't tripped, or the fuse hasn't blown or become loose.
  • R
    rmercadoAug 23, 2025
    Why is it difficult to open the door of my Scandomestic SFS 206 W Refrigerator?
    • J
      jordanwillieAug 23, 2025
      It's normal for the Scandomestic Refrigerator door to be a bit difficult to open, especially right after it has been closed. This is because a slight negative pressure is created to ensure a complete seal. Wait a few minutes before attempting to open it again.
  • J
    Joshua ParkerAug 29, 2025
    Why does my frozen meat have white streaks in Scandomestic Refrigerator?
    • M
      Manuel SilvaAug 29, 2025
      If your frozen meat has white streaks in your Scandomestic Refrigerator, ensure the temperature is correctly set and not too low, consulting the section “Setting the temperature”. Also, verify that the meat hasn't been stored in the freezer for too long by checking the guidelines in the form “Notes on freezing foods.”
  • K
    Kenneth JonesSep 2, 2025
    How to fix unusual sounds from Scandomestic SFS 206 W?
    • L
      Lorraine SmithSep 2, 2025
      To address unusual sounds from your Scandomestic Refrigerator, ensure the product's legs are correctly adjusted for stability. Check that the refrigerator isn't touching the wall. Confirm all removable parts like boxes and shelves are correctly placed. Also, make sure bottles or containers inside aren't touching each other.

Scandomestic SFS 206 W Specifications

General IconGeneral
CategoryRefrigerator
ColorWhite
Energy Efficiency ClassF
Noise Level41 dB
Width55 cm
Height143 cm
Freezer Star Rating4
Defrost SystemManual
TypeFreezer
Climate ClassSN, T
Annual Energy Consumption247 kWh

Related product manuals