Why my Scandomestic SFS 242 W doesn't work?
If your Scandomestic Refrigerator isn't working, here are a few potential causes: * The mains plug may not be properly inserted or may be loose. In this case, insert the mains plug and turn on the appliance. * A fuse might have blown or be defective. Check the fuse and replace it if needed. * The socket itself could be defective. Mains malfunctions should be corrected by an electrician.
What to do if food is not frozen enough in my Scandomestic Refrigerator?
If the food in your Scandomestic Refrigerator isn't freezing enough, consider these possibilities: * The temperature may not be properly adjusted. Please check the initial Temperature Setting section. * The door may have been open for too long. Open the door only when necessary. * A large amount of warm food might have been placed in the appliance recently. If so, temporarily turn the temperature regulation to a colder setting. * The refrigerator could be near a heat source. Refer to the installation location section for guidance.
General| Brand | Scandomestic |
|---|---|
| Model | SFS 242 W |
| Category | Refrigerator |
| Language | English |
To Next Page