How to fix a Scandomestic SFS 61 W that is not working?
If your Scandomestic Refrigerator isn't working, here's what to check: * Ensure the appliance is switched on. * Make sure the mains plug is properly inserted and not loose. * Inspect the fuse and replace it if necessary. * If the socket is defective, an electrician should correct the mains malfunctions.
Why is my Scandomestic SFS 61 W not cold enough?
If food inside your Scandomestic Refrigerator is too warm, it might be due to several reasons: * The temperature may not be properly adjusted. Please refer to the “Control panel” section. * The door might have been open for too long; try to open it only when necessary. * A large amount of warm food might have been placed in the refrigerator recently; temporarily set the temperature regulation to a colder setting. * The appliance could be near a heat source; consult the “Installing your new appliance” section.
What to do if my Scandomestic Refrigerator is too cold?
If your Scandomestic Refrigerator is cooling too much, the temperature might be set too cold. Try turning the temperature regulator to a warmer setting temporarily.
What to do if my Scandomestic Refrigerator compressor doesn't start immediately and it makes unusual noises?
If your Scandomestic Refrigerator is making unusual noises and the compressor doesn't start immediately after changing the temperature setting, there could be a few reasons: * The appliance might be touching the wall or other objects; try moving it slightly. * A component, like a pipe, on the rear of the appliance might be touching another part or the wall; carefully bend the component out of the way if needed. Also, it's normal for the compressor to start after a period of time; this isn't an error.
General| Category | Refrigerator |
|---|---|
| Energy Efficiency Class | F |
| Cooling System | Static |
| Color | White |
| Noise Level | 41 dB |
| Number of Shelves | 2 |
| Reversible Door | Yes |
| Climate Class | N-ST |
| Type | Freestanding |
To Next Page