Need help?Do you have a question about the Scania DC13 085 and is the answer not in the manual?
General| Engine Model | DC13 085 |
|---|---|
| Cylinder Arrangement | Inline 6 |
| Displacement | 12.7 liters |
| Bore x Stroke | 130 mm x 160 mm |
| Fuel System | Common Rail |
| Engine Type | Diesel |
| Power Output | 450 hp |
| Aspiration | Turbocharged |
| Cooling System | Liquid-cooled |
Warns about the danger of starting the engine unexpectedly during work.
Summary of safety precautions for operating and inspecting Scania engines.
Prohibition of smoking in hazardous areas and during refuelling.
Precautions for safe refuelling to prevent fire and explosion.
Warns about toxic exhaust gases and need for ventilation.
Importance of starter lock for preventing unauthorized engine starts.
Warning against using starter gas due to explosion risk.
Warning about running the engine in environments with explosion risk.
Flammability of fuels/lubricants and precautions during handling.
Warning that many chemicals are hazardous to health.
Warning about reductant (AdBlue/DEF) contact and first aid.
Procedures for safely shutting down the engine before work.
Warning about burns from hot engine parts and fluids.
Using lifting eyes and ensuring safety during lifting operations.
Warning about oxyhydrogen gas, flammability, and explosion risks.
Safety precautions for working on the electrical system.
Warning about hot oil and necessary precautions.
Warning about opening hot coolant caps and steam.
Warranty statement for emission control systems on industrial diesel engines.
Details warranty terms and conditions for emission control systems.
Explains general terms, conditions, and the warranty coverage period.
Lists parts included in the emission control systems warranty.
Outlines conditions that may void the warranty or limit coverage.
Lists items and conditions not covered by the warranty.
Explains California ARB's emission control warranty for engines.
Details the warranty period and coverage for emission-related parts.
Outlines owner's duties regarding maintenance and fuel use.
Warns about vanadium pentoxide in the converter, a carcinogen.
Safety precautions for working with SCR system components and during operation.
Warning about hot engine parts and rotating components.
Procedures for starting the engine, including fuel feed and disengaging.
Explains warnings and torque reduction related to SCR system status.
Describes torque reduction based on reductant level and warning lamps.
Details torque reduction and warning lamp behavior for SCR system faults.
Normal operating temperatures and alarm levels for coolant.
Normal and minimum oil pressure values and alarm levels.
Procedures for proper engine shutdown to prevent damage.
Warns about post-boiling risk and turbocharger damage without cooling.
Warning about blocking the starting device during inspection.
Warning about hot water and protective equipment.
Table detailing inspection schedules based on time and operating hours.
Explains Scania LDF standard and recommended oils.
Lists Scania LDF and other approved engine oils.
Procedure for checking the engine oil level when the engine is off.
Steps for changing engine oil, including filter renewal.
Warnings about hot oil and lubrication system pressure.
Steps for cleaning the centrifugal oil cleaner.
Warning about hot oil when removing the centrifugal oil cleaner cover.
Continues cleaning procedure, including checking nozzles and bearings.
Continues the cleaning procedure, focusing on refitting components and tightening.
To Next Page
