Scanlab hurrySCAN 10 - Page 35

hurrySCAN
®
10, digital, 1064 nm, f = 254 mm
Rev. 2.6 e
9 hurrySCAN
®
10 Technical Specifications
35
innovators for industry
9.1 Electromagnetic Compati-
bility
Compliance with EC Guidelines for
Electromagnetic Compatibility (EMC)
The SCANgine
®
, hurrySCAN
®
II, hurrySCAN
®
10/14,
SCANjet
®
II and SCANjet
®
series of scan heads have
been determined to be in compliance with
EC-Guidelines 89/336/EEC (electromagnetic compat-
ibility).
For that purpose, a scan head from one of the above-
mentioned series was tested in the following config-
uration:
– hurrySCAN
®
II 10, digital
–RTC
®
4 PC interface board
Test Specifications
Evidence of fulfillment of the protection goals of
the July 1993 version of EC
Guidelines 89/336/EEC (CE Conformity for EMC)
based on
– EN 61000-6-2: 2001
– EN 61000-6-4: 2001
Result
The device under test fulfills the specifications.
Weight
without objective 2.7 kg
Operating and Storage Conditions
Operating temperature 25 °C ± 10 °C
Storage temperature – 35 °C to +60 °C
Environmental conditions non-condensing,
non-corrosive