Scarab Magnum - User Manual

Details physical characteristics and load capacities of the sweeper models.

Provides towing warnings and explains identification plate locations.

Defines intended use and manuals applicable to the sweeper.

Outlines essential safety points for operating and working on the Scarab sweeper.

Explains the meaning of hazard, caution, information, and check symbols used in the manual.

Lists and illustrates various safety advice symbols relevant to sweeper operation.

Details the function of each switch on the main sweeping control panel.

Describes switches specific to the rear-mounted nozzle option on Magnum Plus models.

Details the function of switches located on the door panels.

Explains the information displayed on the LCD screen when in sweep mode.

Explains the information displayed on the LCD screen when in drive mode.

Provides guidance on safe and efficient operation, emphasizing maintenance.

Introduces the CANbus system, its components, and overall function.

Explains switch grouping, colour coding, and latching/non-latching types.

Describes the LCD screen and light-sensor functionality within the CANbus system.

Switches for hydrostatic drive, water pumps, spray bars, and beacons.

Switches for side brushes, suction nozzles, and widesweep brushes.

Controls for lights, brush pressure, fan, and hopper operations.

Safety interlock and hopper door open switches.

Switches for hydrostatic gearbox engagement and panel mode selection.

Switches for spray bar, side brushes, and suction nozzles.

Switches for widesweep brush and water spray functions.

Switches for work lights and brush pressure adjustments.

Controls for suction fan operation and brush speed settings.

Switches for front brush operation and hopper raise function.

Switches for safety interlocks and suction fan boost mode.

Switch to further increase brush speed.

Controls for rear lights, hopper, door, LCD, and auxiliary panel operations.

Describes the modified control panel for rear-mounted suction nozzles.

Details the air-pressure regulator for brush thrust and the pressure gauge.

Provides a step-by-step guide on how to engage the hydrostatic drive.

Details how to activate the boost setting for increased suction fan speed.

Advises on increasing engine speed for sweeping on inclines.

Provides steps to return the vehicle to normal drive mode.

Offers tips on reducing noise and fuel usage by adjusting engine speed.

Details how to open and close the rear door using cab and external controls.

Step-by-step guide for operating the hopper controls from inside the cab.

Details how to operate hopper controls using external switches.

Provides instructions for closing the rear door, including cautions.

Details procedures to open and close the rear door using the auxiliary pump.

Step-by-step guide for electrically raising the hopper.

Step-by-step guide for electrically lowering the hopper.

Details the procedure for using the standard wander hose.

Explains how to deploy and use the optional wander boom assembly.

Provides information on lubricating and draining the low-pressure water pump system.

Details the operation of the optional high-pressure water pump for cleaning tasks.

Explains how to check oil levels and drain the high-pressure pump.

Explains the process of priming the high-pressure pump after draining.

Introduces the fan wash-assist system for cleaning the suction fan.

Details the steps for operating the suction fan wash-assist system.

Outlines routine maintenance tasks for the sweeper.

Provides specific instructions for operating the water pumps in freezing conditions.

Step-by-step guide for cleaning the suction fan and associated screens.

Explains how to inspect and adjust suction nozzle clearances for optimal performance.

Details how to adjust side brushes and skirts for effective sweeping.

Provides a procedure for draining and cleaning water pump strainers.

Details manual greasing points and procedures according to the schedule.

Instructs on checking and topping up chassis engine and hydraulic oil levels.

Explains the risks and conditions conducive to Legionella bacteria growth.

Offers precautions to minimize the risk of Legionella bacteria in the water system.