EasyManua.ls Logo

Scarab Mistral User Manual

Default Icon
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Front cover
Mistral Road Sweeper
Operating and Basic Maintenance Instructions
This document contains important Health and Safety Advice and must remain with the vehicle at all times.

Table of Contents

Other manuals for Scarab Mistral

Question and Answer IconNeed help?

Do you have a question about the Scarab Mistral and is the answer not in the manual?

Scarab Mistral Specifications

General IconGeneral
BrandScarab
ModelMistral
CategoryBlower
LanguageEnglish

Summary

General Information

Typical weights, dimensions and capacities

Specifications for GVW, dimensions, and tank capacities.

Identification plates

Location of serial number, VIN, and chassis numbers.

Limitations of use

Defines the intended operation of the Scarab Mistral sweeper.

Applicability

Specifies the scope of the operating manual.

Cummins auxiliary engine

Information on the auxiliary engine and where to find its manual.

Warnings

Important safety advice regarding starting, electricals, and towing.

Health and safety advice

Hazard awareness

Vehicle and Environmental Hazards

Details vehicle-related and environmental hazards during operation.

Safety precautions

Personal Protective Equipment (PPE)

Specifies required eye, hand, foot protection, and high visibility clothing.

Operating advice

General Operating Principles

Guidance on efficient sweeping, dust control, and operator responsibility.

Operator Training Requirements

Lists key areas for operator training and certification.

Safety props

The CANbus system

Main control panel switch functions

Auxiliary control panel switch functions

Remote control switch box functions

LCD Monitor

Additional controls and instruments

Brush pressure

Details on adjusting and checking brush pressure settings.

Overhead wander boom

Description of overhead wander boom controls and their functions.

Operating in sweep mode

Reducing noise levels and fuel consumption

Tips for reducing noise and fuel consumption during sweeping operations.

Starting the auxiliary engine

Sweeping

Exiting Sweep Mode

Reduction Gearbox Operation (Scarab Option)

Discharging the hopper - tipping

Using the auxiliary hydraulic pump

Standard wander hose

Using the standard wander hose

Steps to attach and operate the standard wander hose for cleaning.

Rear mounted wander hose and overhead wander boom

Using the rear mounted wander hose

Steps to unhook, position, and use the rear mounted wander hose.

Using the overhead wander boom

Steps to unhook and use the overhead wander boom for sweeping.

Dust suppression

Filling the water tank

Procedure for filling the water tank with clean water.

Using the low pressure water system

Details on operating the low pressure water system for dust suppression.

Draining the system

Instructions for draining the water system to prevent freeze damage.

High pressure water system

Using the high pressure water system

How to operate the high pressure water system for various functions.

High pressure water shut off valves

Illustrates and describes the high pressure water shut off valves.

Hand lance detergent option

Retractable hose

Information on the 13-metre retractable hose for the hand lance.

Draining the system

Procedure for draining the system to prevent freeze damage.

Clearing a blockage in the suction path

Operator's routine maintenance

Key maintenance procedures

Cleaning the suction fan and screen

Detailed procedure for cleaning the suction fan and screen safely.

Auxiliary engine

Engine oil

Specifies engine oil type and procedure for topping up.

Topping up

Step-by-step guide to checking and topping up auxiliary engine oil.

Engine coolant

Topping-up

Procedure for checking and topping up engine coolant levels safely.

Hydraulic oil tank

Topping-up

Procedure for checking and topping up hydraulic oil level.

Oil tank components

Identification of key components of the hydraulic oil tank.

Suction nozzle clearances

Side brushes and skirts

Removing and cleaning the water filter element(s)

Manual greasing and lubrication

LCD monitor - Options screen

Button function

Description of buttons used to navigate and control the LCD options screen.

Option screen menu description

Overview of the menu options available on the LCD screen.

Hours worked

Driver fault codes

CAN error screen

Driver fault codes

EDC

Screen settings

Screen brightness setting

Time and date setting

Rear camera

Information

Button check menu

Main control panel button check

Auxiliary control panel button checks

Operator's Notes

Related product manuals