3. Turn on your HDTV and other AV devices if necessary.
4. Press the button on the side of the HDTV or the SOURCE button on the remote control and select the
correct source according to the Connecting pages.
If You’ve Connected Antenna to the HDTV…
If an antenna or cable (without a cable box) is connected to your TV’s tuner, you will need to go through an INITIAL
SETUP process in order to watch the HDTV.
1. Press MENU to open the menu.
2. Use the button to select the CHANNEL icon and press ENTER.
3. Use the buttons to highlight the signal type and press to select your connection either AIR
or CABLE.
4. Use the buttons to select AUTO CHANNEL SEARCH and press ENTER to scan for channels.
To Next Page
Loading...
Need help?
General
