Schaerer Opal User Manual

SCHAERER OPAL User instruction
BAOP - 02 - V04 Page 63
d) Press the Programming button to
save your Standby time setting.
This timer value will be stored and used
automatically until you change the pro-
gramming.
Note: On safety and energy-saving
grounds, we recommend you switch your
coffee maker off at the mains power switch
over night and when you go away. For
shorter absences, you can switch the ma-
chine to Standby by pressing the mode
selector switch.
9.4 Status display
a) Press the Programming button in
Standby mode to display the following
active functions:
- if the selection button displays light
up, this indicates that the pre- brewing
function is activated;
- If the cleaning / rinse icon lights up,
this indicates that the rinsing func-
tionis activated;
- The Programming display shows the
time delay before the coffee machine
automatically switches to Standby
mode.
9.5 Standard values / factory settings
Before your coffee machine leaves our
factory, we programme it with standard
settings which ensure optimum performance
under normal circumstances. If you adjust
these parameters to suit your individual
preferences, you can revert to these default
values at any time.
a) Switch the coffee maker to Standby
mode. The signal lamp (1b) will light up.
b) Press and hold down the Program-
ming button and the espresso se-
lection button (7) while simultane-
ously switching the machine to Ready
mode at the selector switch .
This restores all of the factory default
settings.
900'042.001 900'044.001
900'036.001 900'008.001 900'0336.001
900'042.001
900'045.001

Schaerer Opal Specifications

General

Brand	Schaerer
Model	Opal
Category	Coffee Maker
Language	English