What does 'select product over temp. brewwater' mean on Schaerer Coffee Art Coffee Maker?
The message 'select product over temp. brewwater' on your Schaerer Coffee Maker means there is an electrical problem between the sensor and the PCB, or the temperature sensor is defective. Contact a qualified service technician.
How to fix 'selection locked grinder R no beans' on Schaerer Coffee Art?
The message 'selection locked grinder R no beans' on your Schaerer Coffee Maker means the bean container on the right-hand side is either empty, or a coffee bean is stuck. To resolve this, fill the bean container with coffee beans (max. 1000 g) and push the button. If it's jammed, use the stem of the cleaning brush to stir the coffee beans around and unclog the grinder, then press the button again.
What to do if Schaerer Coffee Maker says 'selection locked water tank empty'?
The 'selection locked water tank empty' message on your Schaerer Coffee Maker means the water tank is empty. Refill the water tank and place it back under the machine. If the message persists, contact a qualified service technician.
What does 'Right G overloaded' mean on my Schaerer Coffee Maker?
If your Schaerer Coffee Maker displays 'Right G overloaded', it indicates that the right grinder is overloaded. Check the grinder for any foreign objects.
What does 'select product over temp. tea' mean on Schaerer Coffee Maker?
The message 'select product over temp. tea' on your Schaerer Coffee Maker indicates an electrical problem between the sensor and the PCB, or a defective temperature sensor. Contact a qualified service technician.
Why is my Schaerer Coffee Art not producing milk foam?
If your Schaerer Coffee Maker isn't producing milk foam, start by checking if the milk container is filled. If it is full, the milk system might be clogged, so perform the daily cleaning routine.
What does 'select product steam heater timeout' mean on Schaerer Coffee Maker?
The message 'select product steam heater timeout' on your Schaerer Coffee Maker means that the programmed temperature of the steam boiler was not reached within 4 minutes after the machine was switched on, blocking milk and steam beverage output. To solve this, switch the machine off and then back on. If the message remains, contact a qualified service technician.
Why does my Schaerer Coffee Art say 'select product water fol w error'?
The message 'select product water fol w error' on your Schaerer Coffee Maker can be caused by several issues: no water connection, a defective pump, a blocked brew unit or water system, a grinder mixture that is too fine, an incorrectly connected PCB flowmeter, or an electrical problem. To troubleshoot, first open the shut-off valve and press the beverage button again. Then, check the brew unit and the grinder mixture. If the message persists, contact a qualified service technician.
Why is my Schaerer Coffee Art not dispensing milk?
If your Schaerer Coffee Maker isn't dispensing milk, first check if the milk container is filled. If the container has milk, the milk system may be clogged. Try performing the daily cleaning routine to resolve this.
What does 'selection locked initialising' mean on Schaerer Coffee Art?
The 'selection locked initialising' message on your Schaerer Coffee Maker indicates that the software and processor are restarting and the brewer is moving to the 'Home' position, blocking beverage output. To resolve this, switch the machine off and then back on. If the message persists, contact a qualified service technician.
General| Type | Automatic Coffee Machine |
|---|---|
| Voltage | 220-240 V |
| Programmable | Yes |
| Milk Frother | Yes |
| Number of Beverages | Multiple |
| Power Supply | 220-240 V |
| Milk System | Integrated milk |
Lists various safety warnings and symbols used in the manual.
Details the machine's hourly output for various beverages.
Details location, climatic conditions, and power supply requirements for setup.
Covers safe electrical connection, voltage, grounding, and power cord precautions.
Steps to switch on the machine, including initial rinse.
Instructions for filling coffee beans and milk container.
Guides on connecting the milk bag for milk systems.
How to adjust the beverage outlet height.
Steps for preparing coffee beverages.
How to dispense beverages using a MONEY card.
Explanation of navigation controls for PROGRAM card.
Recommended daily cleaning tasks and agents.
Recommended weekly cleaning tasks and agents.
Safety and handling instructions for cleaning agents.
Lists error messages, causes, and remedies.
Recommended water parameters (hardness, pH, chlorine).
General safety instructions and health hazards.
Warning about hot fluids and steam.
Warning about hot machine parts.
Warning about moving components and brew unit opening.
General cleaning procedures and safety.
To Next Page
