What does 'selection locked initialising' mean on Schaerer Coffee Art?
The 'selection locked initialising' message on your Schaerer Coffee Maker indicates that the software and processor are restarting and the brewer is moving to the 'Home' position, blocking beverage output. To resolve this, switch the machine off and then back on. If the message persists, contact a qualified service technician.
Why does my Schaerer Coffee Art Coffee Maker say 'selection locked grounds cont. missing'?
The message 'selection locked grounds cont. missing' on your Schaerer Coffee Maker means that the grounds container has been pulled out, likely for cleaning. After cleaning the brew chamber, reinsert the grounds container. If the message remains, contact a qualified service technician.
How to fix 'selection locked grinder L no beans' on Schaerer Coffee Art?
The message 'selection locked grinder L no beans' on your Schaerer Coffee Maker means the bean container on the left-hand side is either empty, or a coffee bean is stuck. To fix this, refill the bean container with coffee beans (up to 1000 g) and push the button. If the grinder is jammed, use the stem of the cleaning brush to stir the coffee beans around and unclog it, then press the button.
Why does my Schaerer Coffee Art Coffee Maker say 'selection locked heating coffee water'?
The message 'selection locked heating coffee water' on your Schaerer Coffee Maker means the temperature is 10 °C below the programmed temperature, blocking beverage output. Wait until the target temperature has been reached. If the message remains, contact a qualified service technician.
Why does my Schaerer Coffee Art say 'selection locked heating hot water'?
The message 'selection locked heating hot water' on your Schaerer Coffee Maker means that the temperature is 10 °C below the programmed temperature, blocking beverage output. Please wait until the target temperature has been reached. If the message persists, contact a qualified service technician.
Why does my Schaerer Coffee Art say 'selection locked heating steam'?
The message 'selection locked heating steam' on your Schaerer Coffee Maker means that the temperature is 10 °C below the programmed temperature. Beverages cannot be dispensed when the temperature is below 110 °C. Wait until the target temperature has been reached. If the message remains, contact a qualified service technician.
What does 'select product timeout coffee heater' mean on Schaerer Coffee Art Coffee Maker?
The message 'select product timeout coffee heater' on your Schaerer Coffee Maker means that the programmed temperature of the coffee water boiler was not reached within 4 minutes after the machine was switched on, blocking beverage output. To fix this, switch the machine off and then back on. If the message remains, contact a qualified service technician.
What does 'select productHW heater timeout' mean on Schaerer Coffee Art Coffee Maker?
The message 'select productHW heater timeout' on your Schaerer Coffee Maker means that the programmed temperature of the hot water boiler was not reached within 4 minutes after the machine was switched on, blocking hot water beverage output. To resolve this, switch the machine off and then back on. If the message remains, contact a qualified service technician.
What does 'select product steam heater timeout' mean on Schaerer Coffee Maker?
The message 'select product steam heater timeout' on your Schaerer Coffee Maker means that the programmed temperature of the steam boiler was not reached within 4 minutes after the machine was switched on, blocking milk and steam beverage output. To solve this, switch the machine off and then back on. If the message remains, contact a qualified service technician.
Why does my Schaerer Coffee Art say 'select product water fol w error'?
The message 'select product water fol w error' on your Schaerer Coffee Maker can be caused by several issues: no water connection, a defective pump, a blocked brew unit or water system, a grinder mixture that is too fine, an incorrectly connected PCB flowmeter, or an electrical problem. To troubleshoot, first open the shut-off valve and press the beverage button again. Then, check the brew unit and the grinder mixture. If the message persists, contact a qualified service technician.
General| Type | Automatic Coffee Machine |
|---|---|
| Voltage | 220-240 V |
| Programmable | Yes |
| Milk Frother | Yes |
| Number of Beverages | Multiple |
| Power Supply | 220-240 V |
| Milk System | Integrated milk |
Lists various safety warnings and symbols used in the manual.
Details the machine's hourly output for various beverages.
Details location, climatic conditions, and power supply requirements for setup.
Covers safe electrical connection, voltage, grounding, and power cord precautions.
Steps to switch on the machine, including initial rinse.
Instructions for filling coffee beans and milk container.
Guides on connecting the milk bag for milk systems.
How to adjust the beverage outlet height.
Steps for preparing coffee beverages.
How to dispense beverages using a MONEY card.
Explanation of navigation controls for PROGRAM card.
Recommended daily cleaning tasks and agents.
Recommended weekly cleaning tasks and agents.
Safety and handling instructions for cleaning agents.
Lists error messages, causes, and remedies.
Recommended water parameters (hardness, pH, chlorine).
General safety instructions and health hazards.
Warning about hot fluids and steam.
Warning about hot machine parts.
Warning about moving components and brew unit opening.
General cleaning procedures and safety.
To Next Page
