7
2021-11-03 / V1.0
Contactors CF Series – Installation and Maintenance Instructions
Hazards and safety precautions
3.2 Other hazards
WARNING
Contactors must only be used for the purposes specied in the specications and data sheets. Incor-
rect use can cause accidents and severe personal injury.
X
The manufacturer will not be responsible for accidents arising from improper use of the product.
CAUTION
During continuous operation the contactors may become hot. Risk of burns!
X
Before beginning any checks or maintenance on the contactors ensure that the heated com-
ponents have cooled down.
CAUTION
The contactors contain sharp-edged parts. Risk of injuries!
X
Use appropriate tools for installation and maintenance work on the contactors.
X
Wear safety gloves when handling sharp-edged components.
3.3 Measures for avoiding damage and malfunctions
ATTENTION
Aggressive liquids may damage the contactors.
X
Ensure the contactors do not come into contact with aggressive liquids.
ATTENTION
Improper handling of the contactors, e.g. dropping on the oor, can result in breaks, cracks and deformation.
X
Ensure the contactors are always handled correctly.
X
Do not throw the contactors on the oor.
X
At regular intervals perform a visual check of the contactors for possible damage.
X
Immediately replace any damaged parts.
ATTENTION
Depending on the product type, contactors can contain permanent magnets. Such magnets can attract ferro-
magnetic parts resulting in damage to the contactors.
X
Ensure that the contactors are installed in a location where it is not possible for them to attract any ferro-
magnetic parts.
ATTENTION
Depending on the product type, contactors can contain permanent magnets. These permanent magnets can
destroy the data on the magnetic strips of credit or similar cards.
X
Keep credit or similar cards away from the contactors.
To Next Page
