To Next PageTo Next Page
Need help?Do you have a question about the Schaudt Electroblock EBL 271 and is the answer not in the manual?
General| Output Voltage | 12 V DC |
|---|---|
| Battery Voltage | 12 V |
| Input Voltage | 230V AC |
| Battery Type Compatibility | Lead-acid, AGM, Gel |
| Protection | Overvoltage, Short-circuit |
Explains the meaning of DANGER, WARNING, and ATTENTION symbols used in the manual.
Provides critical safety guidelines for device operation and potential hazards.
Introduces the instruction manual and its importance for safe operation.
Details the initial steps for powering on the electroblock and system correctly.
Provides instructions and important warnings regarding battery replacement.
Explains that faults in the power supply system are often caused by blown fuses.
Describes functions protected by polyswitch fuses and their reset mechanism.
Details the steps and precautions for safely shutting down the system.
Lists the integrated modules of the EBL 271 and required system devices.
Details protective circuits and specifies mains connection requirements.
Defines the load limits for the 12V outputs based on fuse ratings.
Details suitable battery types and general charging methods.
Describes the battery selector switch function and standby current draw.
Details charging parameters for living area and starter batteries via mains.
Explains features for refrigerator control and awning light operation.
Covers D+ signal evaluation and starter battery float charge.
Describes marker lights and fold-away bed power functions.
Provides instructions for cleaning the electroblock using appropriate materials.
Lists relevant EC directives and conformity details for the EBL 271.
Mentions required accessories such as the switch panel for operation.
Provides contact information and instructions for returning defective devices.
Details the form and procedure for reporting device faults to the manufacturer.
