What to do if there is no charging current from Schauer Battery Charger?
If there is no charging current from your Schauer Battery Charger, the battery could be severely sulphated; check the battery's condition and age. Alternatively, the battery might have a damaged cell, indicating it needs replacement. Another possibility is that the charger is in overheat protection mode; move the battery and charger to a cooler environment.
What to do if the full/float light won't come on on Schauer CM12A Battery Charger?
If the 'Full/Float' light on your Schauer Battery Charger doesn't illuminate, it could be due to several reasons. The battery capacity might be too large for the charger, causing it to time out; in this case, verify that the charger specification matches the battery capacity. Alternatively, the battery might be defective and require replacement. Another possibility is that the battery is severely sulphated; try switching the charger off and on, then select a higher charge rate setting, ensuring it doesn't exceed your battery's maximum charge limit.
General| Brand | Schauer |
|---|---|
| Model | CM12A |
| Category | Battery Charger |
| Language | English |
Critical safety warnings regarding explosive gases, charger usage, and environmental factors.
Precautions for users, children, and handling battery acid to prevent injury.
Overview of Smart Charge, Maintenance, and Rejuvenation capabilities.
Internal protections against overheat, timer, polarity, and short circuits.
Procedures for connecting the charger to the battery and mains power.
Guide to resolving common problems encountered with the charger.
To Next Page
