Schauer CM1A User Manual

1
User Manual
Battery Charger / Maintainer
For 6 / 12 Volt lead-acid batteries
1 Amp
Model: CM1A (0757-13CEC / SD16101B)

Schauer CM1A Specifications

General

Brand	Schauer
Model	CM1A
Category	Battery Charger
Language	English

Summary

Main Features

Charge & Maintain - Automatic Charge

Charger automatically goes to charging system and can be left unattended.

Charge & Maintain - Automatic Maintenance

Charger switches to maintain battery when charged to 'full' state.

Short Circuit Protection

Charger automatically turns off when output short circuit occurs.

Reverse Polarity Protection

Charger automatically shuts off when output polarity is reversed.

Safety & Temperature Features

Never Overcharge

Charger prevents overcharging of the battery.

Output Overload Protection

Employs a Solid State Circuit Interrupter for overload conditions.

Charging Instructions

Step 1: Pre Charge Check & Electrolyte Level Check

Check battery electrolyte level and add distilled water if necessary.

Step 2: Connecting the Battery Charger to your Battery

Instructions for connecting the charger to the battery, with or without vehicle.

Step 3: Connect the Battery Charger to Mains Power

Connects the charger to a 120VAC Mains Powered socket and turns on power.

Step 4: Disconnecting the Battery Charger from Battery

The Charging Process

Bulk Charge

Fully / Float

Trouble Shooting

Charger Does Not Work

Troubleshooting steps for when the charger has no indicator lights.

Charger Has No DC Output

Troubleshooting steps for when the Fault LED is on.