Scheiber BLOC 10 - Acknowledgement; Safety Warnings; Accessories; Associated References; Equipment Description

L’innovation française depuis 1965
P. 2
L’innovation française depuis 1965
Designation Reference
120Ω BUS CAN Termination 0D.CRD399
Crimp contacts and 21-point MCP connector 62.SAC12003A.00
Bloc 10 allows 6 momentary switches to be interfaced with a status indicator and a backlight indicator per function.
It interfaces with a Scheiber Multibloc network, in order to retrieve the state of the control switch and to deport the control to a
power block (Bloc 9 for example).
Acknowledgement
We thank you for your purchase and hope that you are fully satised with this product.
Before you use this product, we recommend you read the instructions below carefully.
This manual explains how to use and install the product in accordance with its intended use.
Safety Warnings
WARNING: Do not disassemble the device
Any contact with the product's internal components can cause injury. In the event of a malfunction, only a qualied technician is
authorised to repair the device
WARNING: In the event of impact
If the product falls or undergoes heavy impact, immediately contact a qualied person to ensure the device is working correctly
WARNING: Unpacking the equipment
After unpacking the product, make sure that it is complete and in good condition. If you are not sure, immediately contact a person
with the required professional qualication
WARNING: Unpacking the equipment
Do not leave any part of the packaging within the reach of children or vulnerable adults
Equipment description
Accessories / Associated references