Scheppach DC500 Original Instruction Manual

www.scheppach.com
GB
|
21
• Check whether the moving parts function faultlessly
and do not jam or whether parts are damaged. All
parts must be correctly mounted and all conditions
must be fullled to ensure fault-free operation of the
tool.
• Damaged protective devices and parts must be
repaired properly or replaced by a recognised spe-
cialist workshop unless otherwise specied in the
usage instructions.
• Have damaged switches replaced by a customer
service workshop.
• This tool conforms to the applicable safety regula-
tions. Repairs may only be performed by an elec-
trician using original spare parts. Otherwise, acci-
dents can occur.
• If necessary, wear suitable personal protective
equipment. This could include:
- Hearing protection to avoid the risk of becoming
hearing impaired;
- Respiratory protection to avoid the risk of inhaling
harmful dust.
• The operator must be informed about the conditions
that inuence the noise generation.
• Errors in the machine must be reported to the per-
son responsible for safety as soon as they are dis-
covered.
• This device is not designed to collect dangerous
dust.
• This device is not designed to be operated by per-
sons (including children) with impaired physical,
sensory or mental capabilities, or who have insuf-
cient experience and/or insu󰀩cient knowledge
unless they are being supervised by a person who
is responsible for their safety or they are receiving
instruction about how this device is to be used. Chil-
dren should not be left unattended, to ensure they do
not play with the device.
• WARNING: Operators must be adequately instruct-
ed in the use of these machines.
• WARNING: This machine is not suitable for picking
up dust that is hazardous to health.
• WARNING: This machine is intended for dry use
only.
• WARNING: This machine is intended for indoor use
only.
• WARNING: This machine may only be stored in-
doors.
• WARNING: Do not allow the mains connection cable
to come into contact with the rotating brushes.
• If an extension cable is required, make sure that its
cross-section is su󰀩cient for the current consump-
tion of the device. Minimum cross-section 1.5 mm
2
.
• Only use the cable drum when unrolled.
• Check the mains connection cable. Never use any
faulty or damaged connection cables.
• Do not use the cable to pull the plug out of the outlet.
Protect the cable from heat, oil and sharp edges.
• Do not expose the machine to rain and do not use
the machine in a damp or wet environment.
• Ensure good lighting.
• Do not use in the vicinity of combustible uids or
gases.
• When working outdoors, anti-slip footwear is rec-
ommended. Tie long hair back in a hair net. Avoid
abnormal posture
• The operating person must be at least 18 years of
age; trainees must be at least 16 years, however
only under supervision.
• Keep children away from the device when connect-
ed to the mains.
• Keep the workplace free of wood debris and parts
lying around.
• Disorder in the work area can lead to accidents.
• Do not allow other persons, especially children, to
touch the tool or the mains cable. Keep such per-
sons away from the workplace.
• Personnel working on the machine must not be dis-
tracted.
• Only carry out modications, adjustment, measuring
and cleaning work when the engine is switched o󰀨.
- Pull out the mains plug -
• Before switching on, make sure that keys and adjust-
ing tools are removed.
• Switch o󰀨 the motor and pull out the mains plug
when leaving the work station.
• All protection and safety equipment must be reas-
sembled immediately after repair or maintenance
work is completed.
• The safety, operating and maintenance information
of the manufacturer, as well as the dimensions spec-
ied in the technical data, must be observed.
• The applicable accident prevention regulations and
the other generally accepted safety rules must be
observed.
• Do not use low-output machines for heavy work.
• Do not use the cable for purposes for which it is not
intended!
• Make sure that you have secure footing and always
maintain your balance.

Scheppach DC500 Specifications

General

Cleaning type	Dry
Product color	White
Housing material	-
Input power	550 W
Capacity	75 L
Hose length	2 m
Hose diameter	100 mm
Airflow (high speed)	1150 m³/h

Weight and Dimensions

Depth	750 mm
Width	460 mm
Height	420 mm
Weight	16000 g