Scheppach DP3000 User Manual

9
2. Machine description (Fig. 1-20)
1. Throttle Control
2. Engine Switch
3. Right Steering Lever
4. Clutch Control Lever
5. Left Steering Lever
6. Fixation dump box
7. Gear Selection Lever
7a Gearshift panel
8. Dump Box
9. Gearbox
10. Wheel
Engine components
11. Throttle
12. Exhaust
13. Spark plug
14. Air lter
15. Petrol valve
16. Choke lever
17. Recoil starter
18. Handle Recoil starter
19. Mounting screw service port
20. Fuel cap
21. Fuel tank
22. Oil drain plug engine oil
23. Oil ller opening / oil dipstick
24. Drive chain
25. Spark plug connector
26. Adjusting device
27. Counter nut
28. Oil drain plug gear unit
29. Oil ller gear oil unit
3. Scope of delivery
• Dumper DP3000
• Steering rod
• Transport tray
• Wheels
• Shift lever
• Plastic bag with mounting material
• Instruction manual,
• Engine manual
1. Introduction
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this machine assumes no
liability for damage to the machine or caused by the
machine arising from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specied,
Please consider:
Read through the complete text in the operating
manual before installing and commissioning the ma-
chine.
This operating manual should help you familiarise
yourself with your power tool and teach you how to
use it for its intended purpose.
The operating manual include important instructions
for the safe, proper and economic operation of the
power tool, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the power tool.
In addition to the safety instructions in this
operating manual, you must also observe the regu-
lations applicable to the operation of the power tool
in your country.
Keep the operating manual package with the
power tool at all times and store it in a plastic cover
to protect it from dirt and moisture. They must be
read and carefully observed by all operating person-
nel before starting the work. The power tool may only
be used by personnel who have been trained to use
it and who have been instructed with respect to the
associated hazards.
In addition to the safety instructions in this operat-
ing manual and the separate regulations of your
country, the generally recognised technical rules
relating to the operation of such machines must also
be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

Scheppach DP3000 Specifications

General

Fuel type	Gasoline
Motor power	6.5 hp
Product type	Motorized wheelbarrow
Maximum power	- W
Number of wheels	4 wheel(s)
Fuel tank capacity	3.6 L
Engine displacement	196 cm³
Maximum load weight	300 kg
Engine number of strokes	-

Weight and Dimensions

Depth	1380 mm
Width	700 mm
Height	1000 mm
Weight	147400 g