www.scheppach.com
32
|
GB
15. Troubleshooting
Fault Possible cause Remedy
Device does not start
Motor, cable or plug defective,
building circuit breaker tripped
Check power outlet, mains connection
cable, mains plug. Have repair carried out
by electrical specialist. Check building
circuit breakers.
On/off switch (11/10) defective Repair by customer service department
Motor defective Repair by customer service department
Heavy vibrations
Base plate (1) not fastened in place Secure machine to a work bench or similar
Drill bit not clamped centrally Check drill bit in chuck (14)
Motor overheats easily
Overloading of the motor, insuf-
cient cooling of the motor
Avoid overloading the motor while drilling,
remove dust from the motor in order to
ensure optimal cooling of the motor.
Motor makes excessive
noise
Coils damaged, motor defective
Have checked by customer service
department
Improper handling of waste equipment may have neg-
ative consequences for the environment and human
health due to potentially hazardous substances that
are often contained in electrical and electronic equip-
ment. By properly disposing of this product, you are
also contributing to the effective use of natural resourc-
es. You can obtain information on collection points for
waste equipment from your municipal administration,
public waste disposal authority, an authorised body for
the disposal of waste electrical and electronic equip-
ment or your waste disposal company.
To Next Page
Loading...
Need help?
General
