To Next PageTo Next PageWhat to do if my Scheppach Drill does not start?
If your Scheppach Drill doesn't start, the issue might stem from several causes. First, check the power outlet, mains connection cable, and mains plug for any defects. It's also worth checking the building circuit breakers. If these are fine, the on/off switch or the motor itself could be defective, requiring repair by a qualified electrical specialist or the customer service department.
Why does my Scheppach Drill have heavy vibrations?
Heavy vibrations in your Scheppach Drill can be caused by a couple of things. First, make sure the base plate is securely fastened to a workbench or similar surface. Also, check that the drill bit is clamped centrally in the chuck.
How to prevent my Scheppach Drill motor from overheating?
If the motor of your Scheppach Drill overheats easily, it's likely due to overloading or insufficient cooling. To resolve this, avoid overloading the motor while drilling and ensure you regularly remove dust from the motor to maintain optimal cooling.
General| Power | 550 W |
|---|---|
| Chuck Capacity | 1.5 - 13 mm |
| Drilling Capacity (Steel) | 13 mm |
| Drilling Capacity (Wood) | 30 mm |
| Number of Speed Settings | 5 |
| Throat | 104 mm |
| Max. Drilling Depth | 50 mm |
Essential safety advice for operating electric tools, covering general hazards.
Guidelines for maintaining a safe work area to prevent accidents.
Instructions on safe electrical connection and usage to prevent shocks.
Recommendations for operator attentiveness, PPE, and safe body posture.
Safe practices for operating, maintaining, and handling the electric tool.
Critical safety measures specifically for operating drilling machines.
How to set the vertical position of the drill head for different tasks.
Procedure for setting the maximum drilling depth using the depth stop.
