www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
27
14. Troubleshooting
The table below contains a list of error symptoms and explains what you can do to solve the
problem if your tool fails to work properly. If the problem persists after working through the
list, please contact your nearest service workshop.
Problem Possible Cause Remedy
Motor does not start
No mains voltage Check mains voltage
Pump impeller jammed Disassemble and clean the pump
Pump does not suck
Suction valve not in the
water
Insert the suction valve in the
water
No water in the pump
housing
Fill water into the pump housing
Air in the suction line Check for leaks in the suction line
Suction valve leaking Clean suction valve
Suction strainer (suction
valve) clogged
Clean suction strainer
Max. suction height
exceeded
Check suction height
Inadequate pump
delivery
Suction height too high Check suction height
Suction strainer clogged Clean suction strainer
Water level dropping rapidly Position suction valve lower
Pump performance
reduces due to hazardous
substances
Clean pump and replace worn
parts
Thermostat shuts
pump down
Motor overloaded, friction
from foreign matter too high
Disassemble and clean the pump,
prevent foreign matter from being
sucked in (lter)
To Next Page
Loading...
Need help?
General
