Scheppach DWP750 - User Manual

Questions and Answers

A
Amanda SmithAug 11, 2025
What to do if my Scheppach DWP750 does not start?
- N
  nmartinAug 11, 2025
  If your Scheppach Water Pump isn't starting, the issue might be due to no mains voltage. You should check the mains voltage. Another possible cause is that the float switch isn't working. In that case, move the float switch to a higher position.
M
Mindy MaxwellAug 17, 2025
Why does my Scheppach DWP750 switch off after a short running time?
- M
  Melissa WardAug 17, 2025
  If your Scheppach Water Pump switches off after a short running time, it could be due to excessive water contamination causing the motor protection to switch off. To resolve this, pull out the mains plug and clean the pump and shaft. Another reason might be that the water temperature is too high, causing the motor protection to activate. Make sure the water temperature doesn't exceed 35°C.
J
Joseph WoodAug 22, 2025
What to do if my Scheppach Water Pump does not deliver water?
- A
  Allen DiazAug 22, 2025
  If your Scheppach Water Pump isn't delivering water, the pump performance might be reduced due to heavily contaminated and abrasive water impurities. To fix this, clean the pump.
C
Cindy HenryAug 29, 2025
Why is my Scheppach DWP750 delivery inadequate?
- N
  Natalie WrightAug 29, 2025
  If your Scheppach Water Pump has inadequate delivery, the pump performance might be reduced due to heavily contaminated and abrasive water impurities. Clean the pump to resolve this issue.
M
Megan ChambersSep 3, 2025
What to do if my Scheppach DWP750 does not switch off?
- D
  Donald CamachoSep 3, 2025
  If your Scheppach Water Pump doesn't switch off, the float switch might not be able to sink. To solve this, position the pump correctly on the bottom of the shaft.

Scheppach DWP750 Specifications

General

Power	750 W
Max Flow Rate	13000 L/h
Max Head	7.5 m
Outlet Diameter	1 inch
Weight	5.5 kg
Motor Power	750 W
Max Particle Size	35 mm
Hose Connection	1 inch
Voltage	230 V
Frequency	50 Hz