Do not work with the compressor when the safety valve
does not work properly, as described above.
General inspection
Regularly check all the fixing bolts for their tight seat.1
Regularly check, at short intervals, the electric cable 2
for damages. A damaged cable must be replaced by an
electrician in order to avoid any danger.
Cleaning
Always keep the air inputs and outputs free and 1
clean.
Regularly remove dust and dirt with a soft brush or a 2
soft cloth.
Regularly grease all moving parts.3
When the compressor must be cleaned, wipe it with a 4
soft, moist cloth. A mild rinsing agent may be used, but
no alcohol, gasoline, or another cleaning agent.
Never use any caustic agents for cleaning plastic 5
parts.
Attention: Water may never come into contact with the com-
pressor.
m Electric connection
Maintenance of the electric cable
The cable set may only be repaired or replaced by a spe-
cialized workshop. In case of damage, contact your deal-
er.
To Next Page
Loading...
