To Next PageTo Next Page
Need help?Do you have a question about the Scheppach HC24 and is the answer not in the manual?
General| Model | HC24 |
|---|---|
| Tank Capacity | 24 liters |
| Power | 1.5 kW |
| Max Pressure | 8 bar |
| Voltage | 230 V |
| Weight | 24 kg |
| Noise Level | 97 dB |
Instruction to carefully read the manual before setup, operation, or maintenance.
Alerts about dangerous electrical voltage and the need to switch off power.
Warnings regarding the compressor's hot surfaces and potential for sudden restarts.
General advice regarding unpacking, familiarization, and using original parts.
Lists the items included in the product package.
Provides key technical specifications of the compressor.
Identifies and labels the parts of the compressor shown in Figure 1.
Explains the meaning of symbols found on the machine's nameplate.
Stresses preserving the manual and having it read by all personnel.
Highlights that most accidents are due to neglecting basic safety rules.
Guidelines for maintaining an orderly workspace and considering environmental factors.
Safety precautions when working with compressed air and blowing guns.
Safety guidelines specific to paint spraying operations.
Rules for the safe operation and maintenance of pressure vessels.
Information about potential hazards that may remain even with proper use.
Instructions for unpacking and checking for damage or missing parts.
Step-by-step guide for attaching the wheels to the compressor.
Instructions for attaching the rubber feet to the compressor's tank.
Crucial warning and steps to check and fill the oil before initial operation.
Guidance on installing the air filter before first use.
Essential checks and initial steps before starting the compressor for the first time.
Instructions on how to turn the compressor on and off using the main switch.
Explanation of how the compressor operates, pressure regulation, and adjustments.
Routine maintenance tasks including oil changes, condensate drainage, and filter checks.
Regular checks for loose bolts and cable damage.
Guidelines for cleaning the air inputs, outputs, and exterior of the compressor.
Information on the electrical motor, connection standards, and safety requirements.
A table listing common problems, their possible causes, and recommended remedies.
Manufacturer's name and address.
Welcoming message and manufacturer's liability disclaimer.
Emphasizes reading the entire operating instructions before use.
Alerts regarding electrical hazards, hot parts, and sudden restarts.
Explains the manual's purpose and the need to observe country-specific regulations.
Advice on checking for transport damage, delivery completeness, and using original parts.
Lists the items included in the HC24 package.
Provides technical specifications including pressure, oil quantity, and sound levels.
Identifies all parts of the compressor with a corresponding legend for Figure 1.
Explains the meaning of symbols found on the product's nameplate.
Stresses preserving the manual and having it read by all personnel.
Highlights that most accidents are due to neglecting basic safety rules.
Guidelines for maintaining a safe and orderly work area.
Regular checks of bolts and electric cables for damage.
Instructions for keeping air inputs/outputs clean and greasing moving parts.
Details on the electrical connection, compliance with VDE/DIN, and cable safety.
Safety precautions related to high temperatures, air impurities, hose coupling, and eye protection.
Safety measures for paint spraying, including handling hazardous liquids and ventilation.
Guidelines for safe operation, maintenance, and inspection of pressure vessels.
Specifies that the machine must be used in a technically perfect condition and as intended.
Details potential risks like noise, electrical hazards, and specific injuries if safety measures are ignored.
Critical warning about broken air hoses and immediate actions required to prevent injury.
Instructions for unpacking and checking the compressor for defects or missing parts.
Step-by-step guide for attaching the wheels to the compressor.
Instructions for attaching the rubber feet to the compressor.
Warning and procedure to check and fill oil before first use.
Guidance on installing the air filter before the first use.
Essential pre-operation checks, including oil level and air filter.
Instructions for operating the compressor, including controls and pressure regulation.
Steps to safely shut down the compressor and release pressure.
Routine maintenance including oil changes, condensate drainage, and filter checks.
Instructions on how to test the safety valve and precautions to take.
Regular checks for bolt tightness and cable integrity.
Instructions for cleaning the compressor and its components.
Details on the electrical connection, compliance with VDE/DIN, and cable safety.
A table listing common failures, their causes, and suggested remedies.
