www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
|
23
10.2 Maintenance work on the pressure vessel/
condensed water (g. 1)
m Important!
To ensure a long service life of the pressure ves-
sel (5), drain o the condensed water by opening
the drain valve (7) each time after using.
-
-
10.3 Safety valve (g. 2 pos. 15)
-
-
-
10.4 Checking the oil level at regular intervals
(g. 9)
-
10.5 Changing the oil (Fig. 9)
-
-
10.6 Cleaning the intake lter (Fig. 11, 12)
-
10.7 Storage
m Important!
Pull out the mains plug and ventilate the equip-
ment and all connected pneumatic tools. Switch
o the compressor and make sure that it is se-
cured in such a way that it cannot be started up
again by any unauthorized person.
m Important!
Store the compressor only in a dry location
which is not accessible to unauthorized persons.
Always store upright, never tilted!
10.8 Releasing excess pressure
-
Service information
-
11. Disposal and recycling
-
To Next Page
Loading...
Need help?
General
