Scheppach HPC 1400 Translation Of Original Instruction Manual

www.scheppach.com
GB
|
23
The specied total vibration value and the specied
noise emission value have been measured in
accordance with a standardised test procedure and
can be used to compare one power tool with another.
The total noise emission values specied and the total
vibration emission values specied can also be used
for an initial estimation of the load.
m WARNING! The noise emission values and
vibration emission value can vary from the
specied values during the actual use of the
power tool, depending on the type and the manner
in which the electric tool is used, and in particular
the type of workpiece being processed.
Try to keep the stress as low as possible. For example:
Limit working time. In doing so, all parts of the
operating cycle
must be taken into account (such as times in which
the electric tool is switched o󰀨 or times in which it is
switched on, but is not running under a load).
8. Unpacking
• Open the packaging and carefully remove the
product.
• Remove the packaging material, as well as the
packaging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the rst time.
• With accessories as well as wearing parts and
replacement parts use only original parts. Spare
parts can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
m WARNING!
The product and the packaging material are not
children‘s toys! Do not let children play with
plastic bags, lms or small parts! There is a
danger of choking or su󰀨ocating!
Length of mains connection
cable
5 m
Length of high-pressure hose 3 m
Weight 5.0 kg
Protection class II
Protection category IPX5
Design pressure / working
pressure (p)
8 MPa / 80 bar
Max. permissible pressure (p
max)
11 Mpa / 110 bar
Max. supply pressure (p max) 1.2 Mpa / 12 bar
Max. supply temperature (T
in max)
50°C
Rated ow rate (Q) 5.5 l/min
Max. ow rate (Qmax) 6,5 l/min
Subject to technical changes!
Noise and vibration
m WARNING! Noise can have serious e󰀨ects on your
health. If the machine noise exceeds 85 dB, please
wear suitable hearing protection for you and persons
in the vicinity.
The noise and vibration values have been determined
in accordance with EN 60335-2-79.
Noise data
Sound pressure level L
pA
74.6 dB
Uncertainty K
pA
3 dB
Sound power level L
WA
88.3 dB
Guaranteed sound power level
L
WA
92 dB
Uncertainty K
WA
3 dB
Vibration parameters
Vibration a
h
2.089 m/s
2
Uncertainty K 1.5 m/s²

Scheppach HPC 1400 Specifications

General

Brand	Scheppach
Model	HPC 1400
Category	Pressure Washer
Language	English