To Next PageTo Next Page
What to do if my Scheppach HCE2600 Pressure Washer motor runs, but no pressure is built up?
If the motor of your Scheppach Pressure Washer runs but no pressure builds up, it might be due to: * **Air intake in the water supply:** Examine the supply hose and its connections. Replace any parts if necessary. * **Outlet nozzle too large:** Check the outlet nozzle and replace it if needed.
Why my Scheppach HCE2600 Pressure Washer does not work?
If your Scheppach Pressure Washer isn't working, here's what to check: * **No electrical voltage:** Inspect the fuse, mains cable, and mains plug. If any are damaged, have them replaced by qualified personnel. * **Extension lead issues:** If using an extension lead, ensure it has a sufficient wire cross-section and isn't excessively long. Use a larger wire cross-section or a shorter lead. * **Low mains voltage:** The mains voltage might be below the specified value. Contact your energy supply company to check. * **Pump is frozen:** Check the pump and defrost it if necessary.
General| Power | 2600 W |
|---|---|
| Max Pressure | 195 bar |
| Hose Length | 8 m |
| Cable Length | 5 m |
| Motor Type | Induction motor |
| Max. Water Inlet Temperature | 40 °C |
| Pump Material | Aluminium |
| Detergent Tank | Yes |
| Power Source | Electric |
| Motor Power | 2600 W |
Covers hazard levels, electrical safety, operational safety, specific dangers, and PPE.
Details sound pressure, sound power, and vibration emission values.
Instructions for device placement, correct operation, and assembly procedures.
Steps for initial operation, including using cleaning agent and attachments.
Requirements for power connection, extension cables, and connection type Y specifications.
Routine cleaning, long-term pump care, and service information.
