EasyManua.ls Logo

Scheppach MS180-51 - Technical Data; Unpacking

Scheppach MS180-51
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.scheppach.com
GB
|
27
Information about noise level measured in accord-
ance with applicable standards:
Sound pressure L
pA
= 83,5 dB
Measurement uncertainty K
pA
= 3 dB
Sound pressure L
WA
= 95,3 dB
Measurement uncertainty K
pA
= 2,03 dB
Wear hearing protection.
Excessive noise can result in a loss of hearing.
Vibration A
hv
(left/right) 4,56 m/s
2
Measurement uncertainty K
PA
1.5 m/s
2
Keep the noise level and vibration to a minimum!
• Only use faultless devices.
• Maintain and clean the device at regular intervals.
• Adapt your working methods to the device.
• Do not overload the device.
• Have the device checked if necessary.
• Switch the device off if it is not in use.
• Wear gloves.
When using the petrol lawnmower for extended peri-
ods, vibration-induced circulatory problems may oc-
cur (white nger disease).
Information about the duration of use cannot be pro-
vided in this case, since this can vary from person to
person.
The following factors can inuence the condition:
• Circulatory problems in the user’s hands
• Low outside temperatures
• Extended periods of use
We therefore recommend you wear warm work gloves
and take regular breaks.
7. Unpacking
• Open the packaging and carefully remove the de-
vice from the packaging.
• Remove the packaging material, as well as the
packaging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of
the warranty period.
• Familiarise yourself with the product by means of
the operating instructions before using for the rst
time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
• Use only cutting tools and accessories recom-
mended by the manufacturer. Use of other tools
and accessories may result in injury to the user.
• Always keep the lawnmower in good operating con-
dition.
• It is necessary to take enough breaks to reduce
noise and vibration exposure.
Residual risks and accident prevention standards
Neglect of ergonomic principles
Negligent handling of personal protective equip-
ment (PPE)
Careless use or omission of personal protective
equipment may result in serious injury.
- Wear prescribed protective equipment.
Human behaviour, misconduct
- Always concentrate fully on all work.
m Residual risk - can never be ruled out.
Danger from noise
Hearing damage
Prelonged unprotected work with the device may
cause hearing damage.
- Always wear hearing protection as a matter of
principle.
Behaviour in an emergency
In case of an accident, initiate the necessary rst aid
measures and seek medical assistance as quickly as
possible.
6. Technical data
Type of engine 1-cylinder, 4-cycle OHV engine
Cubic capacity: 171 cm³
Rotation speed 2850 min
-1
Power 4 kW / 5,4 HP
Fuel Regular grade petrol/lead-free
max. 10% bioethanol
Fuel tank capacity 0,85 l
Engine oil SAE 30 / 10W30 / 10W40
Oil tank capacity 0.4 l
Cutting height
adjustment
30-75 mm / 8 stages
Catch basket
capacity
65 l
Cutting width 51 cm
Weight 24,7 kg
Technical changes reserved!