www.scheppach.com
38
|
GB
15. Troubleshooting
Troubleshooting
The table shows potential failures, their possible cause and removal options. However, if you are unable to remove the
problem, contact a professional to assist you.
Fault Possible cause Remedy
Loud while running, ma-
chine vibrates heavily
Screws are loose Check screws
Blade fasteners are loose Check blade fasteners
Blade is unbalanced Replace blade
Engine does not start
Brake lever not pressed Press brake lever
Spark plug is defective Replace spark plug
Fuel tank is empty Rell with fuel
Contaminated fuel Empty fuel tank and ll with clean fuel
Cold environment Push the primer button (if present)
Engine faulty Contact authorised customer service
Engine runs unsteadily
Air lter is soiled Clean the air lter
Spark plug is soiled Clean the spark plug
Uneven mowing results
Blade is blunt Sharpen the blade
Cutting height is too low Set correct height
Unsatisfactory bagging of
the grass
Cutting height is too low Set correct height
Blade is worn Replace the blade
Basket is clogged Empty the basket
To Next Page
Loading...
