www.scheppach.com
|
21
, ,
Spare parts and accessories can be obtained from our
cover page.
10. Storage
frost-proof place that is inaccessible to children. The
Store the electrical tool in its original packaging.
Cover the electrical tool in order to protect it from dust
and moisture.
Store the operating manual with the electrical tool.
Storage (g. 1, 11)
•
• The remaining accessories can be stored in the con-
11. Electrical connection
The electrical motor installed is connected and
ready for operation. The connection complies with
the applicable VDE and DIN provisions.
The customer‘s mains connection as well as the
extension cable used must also comply with the-
se regulations.
Important information
motor can be switched back on again.
Damaged electrical connection cable
The insulation on electrical connection cables is of-
ten damaged.
• Passage points, where connection cables are pas-
sed through windows or doors.
• Kinks where the connection cable has been impro-
• Places where the connection cables have been cut
due to being driven over.
Wet vacuuming
-
ses the suction port and suction operation is interrup-
ted.
m IMPORTANT!
-
-
out the liquid residue.
9. Maintenance and cleaning
m WARNING!
disconnect the mains power plug!
Cleaning
running water. This can result in electric shocks and
can damage the device.
-
out the liquid residue. Clean the container with a damp
cloth.
•
•
agents or solvents.
• Keep the ventilation slots clean and free of dirt and
dust.
•
cloth.
• -
Maintenance
The device is maintenance-free.
Service information
Please note that the following parts of this product are
parts are therefore also required for use as consuma-
bles.
To Next Page
Loading...
