Need help?Do you have a question about the Schertler Jam 100 and is the answer not in the manual?
General| Type | Acoustic Amplifier |
|---|---|
| Power Output | 100 W |
| Speaker Size | 8" |
| Effects | Reverb |
| Outputs | XLR, 1/4" Jack |
| Woofer | 8" |
| Tweeter | 1" |
| EQ | 3-band EQ |
Essential safety guidelines for operating the amplifier and avoiding hazards.
Detailed precautions on electrical safety, environmental exposure, and proper installation.
Balanced XLR inputs for microphones with 1 Kohm impedance.
Unbalanced jack inputs for instruments/microphones with 10 Kohm impedance.
Controls for adjusting high, mid, and low frequencies on channels 1-3.
Sets the level of digital reverb for channels 1-3.
Adjusts the volume output for each individual channel.
Dual sensitivity line inputs for various audio sources on channel 3.
RCA line inputs for connecting devices like iPods and computers on channel 4.
Controls for adjusting high and low frequencies on channel 4.
XLR balanced output for connecting to external systems.
RCA unbalanced outputs for connecting to recorders.
Provides phantom power for condenser microphones via XLR inputs.
Controls the output level for the REC OUT connection.
LED indicator showing when the amplifier is switched ON.
Sets the master level for the internal reverb.
Controls the overall master output volume of the amplifier.
To Next Page
