Schertler SA
Via Beroldingen 18
6850 Mendrisio
Switzerland
T +41 (0)91 630 07 10
F +41 (0)91 630 07 11
info@schertler.swiss
www.schertler.swiss
Facebook @schertler.sa
Instagram @schertleraudio
Youtube @Schertler SA
#shareyourschertler
QUICK GUIDE V1
YELLOW SINGLE
Q U I C K G U I D E
THANK YOU
FOR
CHOOSING
SCHERTLER
QUICK START
CONNECTIONS
Connect microphones to the XLR input or instruments
to the ¼”jack socket. Remember to engage the
PHANT button when using condenser microphones
and DYN P48 contact microphones or the +10V
when using STAT pickups or other electrostatic
microphones.
LEVEL SET UP
Start to play (or sing) and turn the GAIN up until the
OL red LED starts to blink, from there turn it back
down a little. Now open the MASTER between 30%
and 50% then nally adjust the CHANNEL VOLUME
as needed.
If at rst use there is no sound, check that the MUTE
EXTERNAL EFFECTS
You can use external effects in parallel via the
SEND and RETURN jack connections
If you want to put the YELLOW at the beginning of
an effects chain, simply use the UNBALANCED
MASTER output.
WARNING: the ground connection must be
provided by the device to which YELLOW is
connected. See the USER GUIDE for more info.
USER GUIDE available at www.schertler.com
Scan the QR code
to open
the USER GUIDE
To Next Page
Need help?
General
