Need help?Do you have a question about the Schiedel ICS Series and is the answer not in the manual?
Outlines essential rules and standards for installation, referencing key regulations.
Importance of air supply for appliance and chimney system efficiency.
Guidance on CO alarm placement and compliance with BS EN 50291.
Advice on safe handling, transport, and storage of chimney components.
Methods for connecting the appliance to the chimney system using appropriate connectors.
Vertical connection requirements for appliances featuring a draught diverter.
Maintaining safe distances from combustible materials for connecting flue pipes.
Guidelines for routing flue pipes to avoid hazards and ensure proper function.
Provisions for chimney inspection and cleaning access points.
Details criteria for alternative connection methods under BS EN 15287-1.
Illustrations of top outlet connections into various chimney types.
Illustrations of rear outlet connections into various chimney types.
Guidelines for chimney sizing and routing for optimal airflow.
Specifies safe distances to combustible materials for system chimneys.
Requirements for enclosing chimneys passing through building structures.
Details on supporting the chimney system and its components.
Guidance on selecting and installing chimney terminals.
Explains the push-fit jointing method for ICS chimney systems.
Assembly instructions for pipes, tees, and elbows.
Details on fitting locking bands for secure joints.
Instructions for fitting appliance connectors and starter pipes.
Information on adaptors for different systems and diameter increasers.
Guidance on using anchor plates for fire chests and extensions.
How to use adjustable pipes for achieving exact lengths on site.
Details on inspection lengths, pipes, and measure pipes.
Installation of the double wall adjustable starter section.
Usage and dimensions for 90°, 93°, and 135° tees and elbows.
Step-by-step guide for the initial installation of the starter section.
Procedure for removing the stove for maintenance.
Steps for re-installing the stove after servicing.
Installation of ventilated support plates through combustible floors.
Use of non-ventilated firestops for bungalows.
Application of ventilated firestop plates for floors and ceilings.
Details on support plates for non-combustible floor penetrations.
Installation and use of wall bands for support and lateral stability.
Installation of adjustable back brackets for chimney support.
Use of structural wall bands for enhanced support.
Extension types for structural wall bands to adjust distance.
Floor-based support plate with drain functionality.
Top plates for internal or intermediate support of vertical chimneys.
Wall support for retrofitting to existing structures.
Mounting side plates or cantilever brackets to walls for support.
Step-by-step guide for installing the Ignis-Protect system.
Checking and correcting the opening dimensions for Ignis-Protect.
Adjusting inner and outer protection pipes for flush fit.
Health and safety instructions, including protective measures.
Ensuring airtight seals for the Protect Box system.
Guidelines for installing and applying the Protect Box sealing kit.
Tables showing maximum load bearing capacity of components.
Table of approximate weights for finished chimney components.
Procedures for initial testing and commissioning of the system.
Guidance on appliance operation, fuel, and chimney maintenance.
Information on the mandatory ICS product notice plate.
Terms and conditions for the ICS system's 10-year conditional guarantee.
Information on earning points and redeeming vouchers for installers.
Details on the mobile app for installation guidance and resources.
Accessing video tutorials and technical downloads.
To Next Page
General