EasyManua.ls Logo

Schiedel Prima Plus User Manual

Schiedel Prima Plus
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SCHIEDEL INSTALLER
REWARDS
www.schiedel.com/uk
DON'T FORGET TO REGISTER YOUR INSTALLATIONS
AND START EARNING SCHIEDEL INSTALLER REWARDS
See inside for more details
Prima Plus
Installation Instructions
SAP Issue 2 | 940003422 | April 2019
Question and Answer IconNeed help?

Do you have a question about the Schiedel Prima Plus and is the answer not in the manual?

Schiedel Prima Plus Specifications

General IconGeneral
BrandSchiedel
ModelPrima Plus
CategoryFan
LanguageEnglish

Summary

Design Guide

Mandatory Requirements

Details mandatory requirements for connecting appliances and installation certifications.

Prior to Installation

Safety and Ventilation Requirements

Emphasizes ventilation needs and carbon monoxide alarm placement for system safety.

Connecting Flue Pipe

Appliance/Chimney Connection

Instructions for connecting flue pipe to appliances and chimneys for different fuel types.

Distance to Combustibles

Importance of maintaining correct distances to combustible materials as per regulations.

Connecting Flue Pipe Route

Rules and recommendations for routing connecting flue pipes to avoid ignition and meet system requirements.

BS EN 15287-1

Acceptable Alternative Methods of Connection

Details criteria and examples for alternative connection methods for solid fuel appliances.

Installation Instructions

Joint Detail and Standard Sections

Explains the jointing system for Prima Plus components and installation of standard sections.

Appliance Connection Methods

Details sealing methods for appliance connectors with condensing and non-condensing appliances.

Connecting to Appliance Outlet

Describes how to connect the male spigot to the appliance outlet and seal the joint.

Chimney Lining Components

Lowering Pipe and Support Plate

Describes components for lowering and supporting Prima Plus when used as a chimney liner.

Offset Dimensions (2 Bends)

Provides tables for offset dimensions using two bends at 15°, 30°, and 45°.

Offset Dimensions

Offset Dimensions (2 Bends + Pipe Section)

Offers tables for offset dimensions using two bends and a standard pipe section.

Typical Installation

Max Offset Info

After Installation

Product Guarantee

Related product manuals