Need help?Do you have a question about the Schlage L9040 and is the answer not in the manual?
General| Backset | 2-3/4" |
|---|---|
| Series | L Series |
| Handing | Reversible |
| Certification | ANSI/BHMA A156.13 |
| Warranty | Limited Lifetime |
Details standard certifications and specifications for L/LV9000 and L400 series locks.
Explains dot chart notation and provides an index of lock functions with page references.
Exploded views and part numbers for various lock case series, including L400 and L9000.
Covers single/double dummy trims, passage latches, and basic privacy functions.
Details trims with features like emergency buttons, coin turns, and privacy functions.
Covers cylinder x turn, double cylinder, and deadbolt trims for various series.
Details trims for electrically locked/unlocked functions and request-to-exit features.
Illustrates various lever and knob designs available for trim options.
Details outside/inside escutcheons and rose trim options.
Lists parts for escutcheons, screws, and mounting hardware.
Covers different types of armor fronts and strike dimensions.
Provides charts for cylinder lengths and requirements based on trim and door thickness.
Details full size and small format interchangeable core types and parts.
Covers special options, electrically locking features, and request-to-exit.
Step-by-step installation guides for various L9000 series lock functions.
Step-by-step installation guides for various L400 series lock functions.
Explains how to order products and lists available finishes.
Details the product warranty information and patent notices.
To Next Page
