8
10 Install the armor plate.
11 Connect the battery cable.
Install four (4) AA batteries into the battery holder. Tuck the cable behind
the tab in the escutcheon
After holder
is installed,
tuck cable
behind tab.
12 Install the battery cover and tighten the screw.
12a Optional: Install security screw and washer.
Remove standard screw and washer and replace with security screw
and washer.
13 Install the inside lever.
*included in box
14 Continue to User Guide.
Go to page 9 for information for programming your lock.
To Next Page
Loading...
