Schlagel EDI-V5 CONTROL - User Manual

SCHLAGEL, INC.SCHLAGEL, INC. EDI - V5 CONTROL
EDI-V5_Install 1/11/2011
For EDI-V5 Controls Using The Inverter Drive
• Wiring The Control
• Configuring The Control
• Customizing The Display
• Access Code Description
• How To Use The Option Codes
• Screen Alerts And Alarms
• EDI-V5 Accessories
For Controls with firmware revision EDI-V5.100.5 and earlier.
EDI-V5 CONTROL
INSTALLATION MANUAL
WIRING and SETUP INSTRUCTIONS

Summary

Wiring the Control

Panel Power 110 Volt Wiring

Details the connection of the 110V supply to the control unit's terminal block.

Motor Power 230 Volt Wiring

Explains how to connect the 3-phase motor for 230V operation.

Intrinsically Safe Sensor Wiring

Configuring the Control

Starting the Setup Routine

Explains the process of the control automatically recognizing and configuring the distributor.

Autotune Sequence

Details the automatic spout adjustment for duct centering during setup.

Access Code Description

Overview of Access Codes

Introduces various access codes for configuration and operation of the EDI-V5 control.

Key Access Codes List

Screen Alerts and Alarms

Timeout Error

Describes the error when no feedback is received for spout movement.

Positioning Error

Spout Moved Error

Sensor Error

Schlagel EDI-V5 CONTROL Specifications

General

Cooling Method	Forced air cooling
Storage Temperature	-20°C to +60°C
Input Voltage	380-480V AC
Output Voltage	0-480V AC
Power Range	0.75-630kW
Control Method	V/F Control, Vector Control
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short Circuit
Communication Interface	RS485, Modbus, Profibus, Ethernet
Humidity	5% to 95% RH, non-condensing
Altitude	Up to 1000m