SPIN
-With GRIND->SPIN and DAMPING fully CCW
the four SPIN outputs will have phase-related
sine waves
-These all come from the same oscillator
and will be at the same frequency
-This will track v/oct (check that FM1 is down)
-At audio rate you can process them seperately
to create stereo eects or mix them together
-At LFO rate you could use them for quad panning
by sending one audio signal to four VCAs and
control each vca with one phase
0°
90°
180°
270°
ALL TOGETHER
OSCILLATE
KNOB POSITIONS
IN FULL CW
GRIND -> SPIN FULL CCW
DAMPING FULL CCW
FM 1 FULL CCW
To Next Page
Loading...