6
/
33
We absolutely recommend to observe the following protective measures when mounting of FS Uno:
Always wear ear protection when
carrying out noisy work
Remember to wear reective
vests and safety shoes all the time
Always wear a hard hat when
there might be falling objects or if
you could hurt your head in some
other way
Wear protective gloves when
working with sharp-edged
components
When carrying out dusty work
,
always wear breathing protection
Wear safety glasses when
carrying out grinding and abrasive
operations in order to avoid any
danger to your eyes caused by
ying liquids or parts (sparks,
splinters)
Apart from that, please consider the applicable rules and regulations on accident prevention and environmental protection
that apply at the respective installation site as well as the work instructions and directives by the plant owner/operating
company or at the place of operation.
NOTICE
warns about situations that can lead to material damage and disturbances during the operating
procedure, if the instructions are not observed.
Important information and notices
regarding the product and its handling and/or mounting of the product are characterized by the
following symbol.
REFERENCES
All documents relevant for the mounting that are not included in these Mounting Instructions, are marked
with this symbol.
Schletter Solar GmbH – Alustraße 1 – 83527 Kirchdorf
Mounting instruction FS UNO with SRF Foundation Posts | 2016.09 V.004
To Next Page
