Schletter FS Uno - Verification and Storage

9
/
33
2.3. Provide forklift trucks and hoisting equipment
• Organize suitable forklift trucks and hoisting equipment to be available at the moment of delivery.
• Choose the suitable forklift trucks and hoisting equipment in cooperation with the site manager in charge.
• Make sure that the components, pallets and long items can properly be unloaded.
• Provide forklifts and hoisting equipment with dierent fork intervals or with adjustable forks.
2.5. Storage of the components
We recommend to observe the following points on receiving the goods:
• Visual inspection of the delivered goods
• Check whether the supplied goods correspond to the delivery order
• Delivered quantity / comparison with packing lists and delivery note
• General condition of the goods
• Damages of the delivery
• Delivery documents
The following shipping documents need to be veried on delivery:
• Delivery note
• Packing list
Claims as to defects by the customer shall require that he has complied with his duties of examination and
notication of complaint contained in Sections377, 381 of the German Commercial Code [HGB]. Defects
discovered during incoming goods inspection or later shall be notied to Schletter GmbH in writing
without undue delay. A notication shall not be unduly delayed if it has been made within two weeks;
the timely dispatch of this notication shall be deemed sucient to meet the deadline. Regardless of the
obligation to inspect and notify, the customer shall notify Schletter of obvious defects (including delivery
of the wrong product or in not enough quantity) within two weeks of delivery in writing; the timely
dispatch of this notication shall also be deemed sucient in this case to meet the deadline. A general
right to return purchased goods is not granted.
Extract from the General Terms and Conditions of Sale and Supply of Schletter GmbH - download available at www.schletter.de/AGB_en
2.4. Check the scope of delivery (for completeness)
The components will also be delivered in cardboard boxes on pallets. And there also are fragile and sensitive items among
those components.
• Unload the items on rm and stable ground only.
• Protect all components against rain, snow, moisture and other weather conditions.
• Store the items in dry and well-ventilated storage buildings or tents.
• Never store components outdoors or covered by a plastic sheet only.
If you adhere to the hints above, you can prevent the goods from being damaged already before mounting.
Schletter Solar GmbH – Alustraße 1 – 83527 Kirchdorf
Mounting instruction FS UNO with SRF Foundation Posts | 2016.09 V.004