5
I. GENERAL
• Keep this manual for future reference.
• Please keep this manual near the actuator so that it is available for consultation.
• For questions or clarifications please contact cameron.slb.com
• To get / request new copies of the manual please contact cameron.slb.com
• The manufacturer reserves the right to modify , without prior notice, the characteristics of the equipment
described in this publication and is not obligated to update any products and manuals previously issued.
A. Legend for Safety Symbols
Explanation of Warning Symbols (Where Applicable)
Before carrying out any operation on the actuator, the electric power
supply (if present) must be shut-off.
Risk of explosion: before carrying out any operation on the actuator, the
actuator must be isolated from the pneumatic supply source.
Before carrying out any operation on the actuator, the control group (if
present) must be discharged from the pressure therein trapped, particular
care shall be taken on storage tanks and pressure filters.
Every operation on the actuator must be performed by qualified personnel,
equipped with safety clothes and devices (gloves, helmet, glasses, etc.).
During the operation on the actuator, the operator must pay attention to
the presence of liquids potentially noxious for the health and the
environment.
To Next Page
Loading...
Need help?
General