EasyManua.ls Logo

Schmid Watson - 7 Technical Specifications; Interfaces; DSL Line Interface; Ethernet Interfaces

Schmid Watson
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Revision: 2012-02-15
7-1
7 Technical Specifications
7.1 Interfaces
7.1.1 DSL Line Interface
Standard referred: ETSI TS 101 524, ITU-T G.991.2 Annex B (Revision 2004)
Number of Pairs: 1, 2, 3 or 4
Line Rate per Pair: 192 – 15'360 kbit/s
Line Code: Trellis-coded PAM-16, PAM-32, PAM-64, PAM-128
Nominal Line Impedance:
135
Transmit Power @ 135:
According to TS 101 524
Overvoltage Protection: ITU-T K.21 (07/03) K.44(7/03)
Connector Type: RJ-45, 8 pin
7.1.2 Ethernet Interfaces
Standard referred: IEEE 802.3
Crossover Auto-Crossover
Bitrate 10/100 Mbps (Auto-negotiation)
Duplex Mode Half/Full Duplex (Auto-negotiation)
7.2 Power Consumption
Model Power Consumption
SZ.441.V400 < 10 Watts
SZ.441.V800 < 10 Watts
7.3 Ethernet
Maximum Frame Size 1'526 bytes
Number of VLANs 15 with Switch in 802.1Q mode
Traffic Shaping Configurable
Number of Queues 8

Table of Contents

Other manuals for Schmid Watson

Related product manuals