SCHOTTEL SRP 300 - User Manual

SCHOTTEL SRP 15 .... SRP 300 No.
BA 103 E
Dat.
1-12-77
TD-NM-in Seitenz.
19
Seite
1
SCHOTTEL - RUDDER PROPELLER
"SRP"
OPERATING INSTRUCTIONS
Section Page
1 DESCRIPTION 2
1.1 General 2
1.2 Design 2
Fig. 1 Cross-sectional View 3
1.3 Lubrication 4
1.4 Compensating Fin 4
1.5 Steering Worm Gears 4
2 OPERATION 6
2.1 Measures to be taken when Operating a New 6
or Repaired SRP
2.2 Regular Checks prior to Start-up 6
Table of the Oil Quantities 7
2.3 Checks during Operation 8
2.4 Swinging out the SRP 8
3 MAINTENANCE 8
3.1 Maintenance Schedule 8
3.2 SRP Gear-box Oil Change 10
3.3 Attached Steering Gearing Oil Change 10
3.4 Checks on the Lower Gearing 12
3.5 Measures to be Taken for Taking an 12
SRP out of Operation for up to 6 Months
3.6 Setting the Compensating Fin 12
3.7 Air Filter Cleaning 14
3.8 Rudder Position Indicator Adjustment 14
4 INSTALLATION 14
4.1 Schottel Navigator Installation 14
4.2 Installation of the SRP in the Well 14
4.3 Propeller Installation 16
RECOMMENDED LUBRICANTS 19

Summary

Operation of the SCHOTTEL Rudder Propeller (SRP)

Initial Operation Procedures for New;Repaired SRP

Covers filling with oil and initial checks for new or repaired SRP units.

Pre-Start-Up Checks for SRP Operation

Lists essential checks to perform before starting the SRP, including oil levels and vent cocks.

In-Operation Checks for SRP

Maintenance of the SCHOTTEL Rudder Propeller (SRP)

SCHOTTEL SRP Maintenance Schedule

Outlines recommended maintenance intervals and tasks for the SRP.

Changing SRP Gear-Box Oil

Step-by-step guide for draining and refilling the SRP gear-box oil.

Changing Steering Gearing Oil

Procedure for changing the oil in the attached steering gearing.

Installation of the SCHOTTEL Rudder Propeller (SRP)

SRP Installation in the Well

Propeller Installation Procedures

Instructions for installing propellers on tapered shafts and flanged connections.

SCHOTTEL SRP 300 Specifications

General

Brand	SCHOTTEL
Model	SRP 300
Category	Marine Equipment
Language	English